According to figures supplied by the European Tyre and Rubber Manufacturers’ Association (ETRMA) the car tyre replace- ment business in Europe posted modest two percent growth in 2014. This, however, is not the full picture, because the growth rates recorded in China, Brazil and the USA, for example, were far higher. For Continental it’s the global picture that counts, and since 2011 the Corporation has invested over two billion euros in the systematic expansion of its worldwide tyre production capacity. As a result, in the last few years the fourth-largest player in the global tyre industry has set the stage for sustainable long-term growth. The largest investment program in the Corpora- tion’s history is designed to spread produc- tion and sales activities more evenly around the world, with the long-term aim of out-performing the market in terms of growth. This applies, in particular, to Brazil, Russia, India, China and the USA. In Europe Continental is already one of the leading tire manufacturers in both the original equipment sector and the replacement business.
The results of this huge investment include new tire plants in Kaluga, Russia (2013) and Sumter, South Carolina/USA (2014). Added to which, extensive capacity expansion at the existing tyre plants in Camacari (Brazil), Hefei (China), Mt. Vernon, Illinois (USA) and also Otrokovice (Czech Republic) has put them in the position long-term to cover demand in their respective regions with tyres produced locally. As part of this expansion, capacity will increase to some 8.5 million car tyres per year in Camacari, 8 million tyres in Hefei and up to 12 million tyres in Mt. Vernon.
The team at the Modipuram plant in India, meanwhile, are pushing ahead with the radialization of truck tyres, and in Otrokovice production of truck tyres is being ramped up to 1.5 million units. All of the above represent impressive milestones on the road to an unprecedented expansion of production capacity for the Tyre Division, one that will push potential annual output up by 26 million tires by 2018. As Nikolai Setzer, Member of the Executive Board at Continental AG and Head of the Tyre Division, explains: “When we formulated our Vision 2025 in 2010, the share of sales generated outside the EMEA region still stood at 30 percent. We’ve since achieved a notable increase in this share. And we’re continuing to pursue this goal so that we can reduce our dependency on the market cycles in Europe and, through increased sales activities in The Americas and the APAC region, achieve a more balanced revenue spread over the long term.”
While the expansion of production capacity takes priority outside Europe, the investment spotlight within the continent is on high-tech- nology projects. Most recently, at the end of 2014, the new Tyre Technology Center in Púchov, Slovakia was opened. The invest- ment volume for the further expansion of this research and development center stands at some 7.5 million euros. In order to meet rising demand for new production technologies for the extensive tire portfolio, the workforce at the Tyre Technology Center is set to grow by approximately 15 percent by 2016. The new facility in Púchov is working closely with the Tire Division’s main Research and Development Center at Continental’s German headquarters in Hanover. Here, some 1,200 engineers, chemists and other experts are in- volved day in, day out, in developing new tire models for cars, light trucks and 4x4 vehicles, as well as truck tyres and specialty tyres.
Back in September 2014, the ground-break- ing ceremony took place for the new High Performance Technology Center (HPTC) at Continental’s Korbach plant in the German state of Hesse. The hall for a new production facility – in effect a “factory within a factory” – is taking shape on a plot measuring around 12,000 square meters. Investment here is set to total 45 million euros. Operations at the new facility are scheduled to begin in July 2016 on two fronts. On the one hand, the HPTC will produce high-performance tyres for ultra-sporty passenger cars boast- ing an extremely high level of technological sophistication and powerful engines. But the plan is also to drive forward development and optimization of production processes from Korbach prior to subsequent introduc- tion across other Continental tire plants. With this injection of resources in Korbach, Continental is adding to its investment in the ongoing development of product-spe- cific know-how related to tire construction, tread patterns, contours and compounds, as well as contributing to the expansion of tire production capacity worldwide. Plus, the concentration of expertise in Korbach will be used to support other production locations and provide a central driver for the devel- opment of new high-tech processes for tyre plants around the world.
Another example of technological pro- gress and the focused implementation of Vision 2025 arrived with the construction of the Automated Indoor Braking Analyzer (AIBA), the world’s first fully automatic indoor tyre testing facility at the Corpora- tion’s Contidrom proving grounds, north of Hanover. This milestone in the development of testing technology for summer and winter tyres opened for business at the end of 2012. The outwardly unprepossessing hall is 300 meters long and up to 30 meters wide. Whatever the weather outside the AIBA, inside up to 100,000 fully automated test braking maneuvers a year can be carried out using computer-controlled, unmanned vehi- cles. Speeds of up to 120 km/h are possible, and the road surfaces can be swapped over hydraulically within just a few minutes. Tests can be conducted on dry or wet surfaces, and temperatures can be adjusted as desired and with impressive accuracy. The AIBA also has an ice hall, in which braking performance on icy roads can be tested.
Not far away, at Hanover-Stöcken, a plant called ContiLifeCycle was opened in Novem- ber 2013. With its integrated approach of hot and cold retreading for truck and bus tyres, plus a specially developed industrial-scale rubber recycling facility, this globally unique tire factory has taken on a pioneering role. Tread buffings from the retreading processes are recycled in such a way that they can be re-used as a raw material in tyre compounds. The new retreading plant in Hanover-Stöck- en will have a maximum annual production capacity of 180,000 tyres. As Setzer adds: “Our investment in high-technology projects and in the expansion of our proving grounds is allowing us to increase the efficiency and reproducibility of our tyre testing. But it is also designed to show our customers in the original equipment and replacement sectors, as well as car drivers worldwide, that we are making huge investments in new solutions in their best interests, so that we can continue to offer products at the highest possible technological level into the future.
This investment program was launched in the second half of 2011. That was when Continental took over Modi Tyres Company Limited (MTCL) in India, which has since been renamed Continental Tyres India Lim- ited and is focused on the production and sale of cross-ply and radial tires for trucks and buses and radial tyres for cars. In India Continental is concentrating mainly on the replacement business, for which the Conti- MaxContact MC5 and ContiComfortContact CC5 premium car tyre lines, developed specif- ically for the Indian market, were introduced at the end of 2014.
At the Kaluga plant in Russia, meanwhile, expansion has focused from day one on demand for both replacement and OE tyres for vehicles from leading manufacturers, not least because various international representatives of the automotive industry, including Volkswagen, are also located in Kaluga. Construction of the plant began in November 2011 and was completed, ahead of schedule, in less than two years. The arrival of tyre production in Kaluga sees Continental add to its existing manufacturing facilities for engine control units and other electronics components.
While the investment in new production facilities in India and Russia serves mainly to drive the strategic development of new mar- kets, the expansion in the USA is the result of a sharp rise in demand for Continental car and light truck tyres in both the replacement and original equipment sectors. At the new tyre plant in Sumter, South Carolina, which also represents an important milestone for the expansion of the Corporation’s tire busi- ness in the USA, annual production capacity is scheduled to reach around five million tyres by the end of 2017. In a second phase, output is due to be ramped up to full capacity of some eight million tyres per year by 2021.
Expansion is also the name of the game in other locations around the world. These include the new plant in Hefei, China, which came on stream in May 2011, has a planned annual production capacity of four million tires, and mainly supplies the Chinese market with high-quality premium tires. The Hefei plant’s maximum potential output at the existing Continental site is 16 million tires per year. The Two Wheel Business Unit also be- gan production of premium bicycle tires for the Asian market at Hefei in 2012. “Through rigorous implementation of our Vision 2025, we are also striving to increase synergies between the various tire business units and, in doing so, further improve the overall efficiency of our Tire Division,” says Nikolai Setzer, setting out another strategic goal.